12 Ekim 2019 Cumartesi

CubeMX & STM32F051C8T6 DAC Kodları


/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : main.c
  * @brief          : Main program body
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                        opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
  */
/* USER CODE END Header */

/* Includes ------------------------------------------------------------------*/
#include "main.h"

/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */

/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */

/* USER CODE END PTD */

/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */

30 Temmuz 2019 Salı

DS3231 STM32F1 Hal Kütüphanesi

ds3231.c dosyası


#include "ds3231.h"

//--------------------------------------
char str[100];
uint8_t data[256];
uint16_t size;
uint8_t readBuf[7];

char * days[] = {
    "Sun",
    "Mon",
    "Tue",
    "Wed",
    "Thr",
    "Fri",
    "Sat"
};

struct Calendar {
    uint8_t sec, min, hour, day, date, month, year;
}
calendar;

uint8_t BCD2DEC(uint8_t c) {
    uint8_t ch = ((c >> 4) * 10 + (0x0F & c));
    return ch;
}

uint8_t DEC2BCD(uint8_t c) {
    uint8_t ch = ((c / 10) << 4) | (c % 10);
    return ch;
}

//--------------------------------------
void DS3231_sendData(I2C_HandleTypeDef hi, uint8_t DEV_ADDR) {
    uint8_t writeBuf[1];
    writeBuf[0] = 0;
    while (HAL_I2C_Master_Transmit( & hi, (uint16_t) DEV_ADDR,
            (uint8_t * ) & writeBuf, sizeof(writeBuf), (uint32_t) 1000) != HAL_OK) {
        if (HAL_I2C_GetError( & hi) != HAL_I2C_ERROR_AF) {
            size = sprintf((char * ) data, "DS3231 write failed\n");
        }
    }
}
//--------------------------------------
void DS3231_setDate(I2C_HandleTypeDef hi, uint8_t DEV_ADDR) {
    uint8_t data[8];

    data[DS3231_CONTROL] = 0; // should be zero REGISTER SELECT from that will start
    data[DS3231_SECONDS] = calendar.sec; //sec
    data[DS3231_MINUTES] = calendar.min; //min
    data[DS3231_HOURS] = calendar.hour; //hour
    data[DS3231_DAY] = calendar.day; //day
    data[DS3231_YEAR] = calendar.year; //year
    data[DS3231_MONTH] = calendar.month; //month
    data[DS3231_DATE] = calendar.date; //date

    while (HAL_I2C_Master_Transmit( & hi, (uint16_t) DEV_ADDR, (uint8_t * ) & data,
            8, (uint32_t) 1000) != HAL_OK) {
        if (HAL_I2C_GetError( & hi) != HAL_I2C_ERROR_AF) {
            size = sprintf((char * ) data, "DS3231 write failed\n");

        }
    }
}
//--------------------------------------
uint8_t * I2C_ReadRawData(I2C_HandleTypeDef hi, uint8_t DEV_ADDR) {
    while (HAL_I2C_Master_Receive( & hi, (uint16_t) DEV_ADDR, (uint8_t * ) & readBuf,
            (uint16_t) 7, (uint32_t) 1000) != HAL_OK) {
        if (HAL_I2C_GetError( & hi) != HAL_I2C_ERROR_AF) {
            size = sprintf((char * ) data, "DS3231 read failed\n");
        }
    }
    return readBuf;
}

void I2C_ReadCalendarData(I2C_HandleTypeDef hi, uint8_t DEV_ADDR) {
    while (HAL_I2C_Master_Receive( & hi, (uint16_t) DEV_ADDR, (uint8_t * ) & readBuf,
            (uint16_t) 7, (uint32_t) 1000) != HAL_OK) {
        if (HAL_I2C_GetError( & hi) != HAL_I2C_ERROR_AF) {
            size = sprintf((char * ) data, "DS3231 read failed\n");
        }
    }
    calendar.sec = readBuf[0];
    calendar.min = readBuf[1];
    calendar.hour = readBuf[2];
    calendar.day = readBuf[3];
    calendar.date = readBuf[4];
    calendar.month = readBuf[5];
    calendar.year = readBuf[6];
}

char * retrnAsString(uint8_t data) {
    static char res[2];
    uint8_t tempVal = BCD2DEC(data);
    sprintf(res, "%c%c", ((tempVal / 10) % 10) + 0x30, (tempVal % 10) + 0x30);
    return res;
}
uint8_t readIntSeconds() {
    return calendar.sec;
}

char * readSeconds() {
    return retrnAsString(calendar.sec);
}

char * readMinutes() {
    return retrnAsString(calendar.min);
}

char * readHours() {
    return retrnAsString(calendar.hour);
}

// Day Pazartesi ->Pazar
char * readDay() {
    static char res[2];
    uint8_t tempVal = BCD2DEC(calendar.day);
    sprintf(res, "%c", (tempVal % 10) + 0x30);
    return res;
}

char * readDate() {
    return retrnAsString(calendar.date);
}

char * readMonth() {
    return retrnAsString(calendar.month);
}

char * readYear() {
    return retrnAsString(calendar.year);
}

void setSeconds(uint8_t sec) {

    calendar.sec = DEC2BCD(sec);
}

void setMinutes(uint8_t min) {
    calendar.min = DEC2BCD(min);
}

void setHour(uint8_t hour) {
    calendar.hour = DEC2BCD(hour);
}

void setDay(uint8_t day) {
    calendar.day = DEC2BCD(day);
}

void setDate(uint8_t date) {
    calendar.date = DEC2BCD(date);
}

void setMonth(uint8_t month) {
    calendar.month = DEC2BCD(month);
}

void setYear(uint8_t year) {
    calendar.year = DEC2BCD(year);
}


11 Temmuz 2019 Perşembe

STM32F103C8T6 ile RTC Uygulaması Kodları


/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : main.c
  * @brief          : Main program body
  ******************************************************************************
  ** This notice applies to any and all portions of this file
  * that are not between comment pairs USER CODE BEGIN and
  * USER CODE END. Other portions of this file, whether 
  * inserted by the user or by software development tools
  * are owned by their respective copyright owners.
  *
  * COPYRIGHT(c) 2019 STMicroelectronics
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */
/* USER CODE END Header */

14 Mart 2019 Perşembe

Android Studio - RC Bluetooth Araba Projesi

Serinin son videosuna hoşgeldiniz. Bu videomda daha önceki videolarda anlatmış olduklarımı uygulayacağımız RC arabayı gerçekleştiriyoruz. Kit olarak 2WD Robot araba kitini kullandık.
İyi seyirler dilerim.

Video ve kodlar aşağıda




20 Şubat 2019 Çarşamba

STM32F103C8T6 16x2 LCD HAL Kütüphanesi

Herkese merhaba,
Youtube'da başlatmış olduğum CubeMX ile STM32F103 programlama serisinde kullandığım LCD HAL kütüphanesini burada paylaşıyorum.

Öncelikle kütüphanenin orijinalinin bulunduğu blog sayfasının linkini paylaşmak istiyorum.


Kütüphanenin Orijinal Halinin bulunduğu Blog Sayfası